Index of /pub/projects/john/contrib/parallel/dnetj
Name Last modified Size
Parent Directory 13-Jan-2012 13:00 -
README.txt 03-Mar-2008 06:27 5k
dnetj-0.2.5.tar.gz 03-Mar-2008 06:28 815k
http://www.bindshell.net/tools/dnetj
Distributed Networked John
This is a client/server framework that wraps around a slightly modified
version of John The Ripper.
In contrast to the MPI version of John, dnetj allows the use of nodes
which are of differing speeds and for nodes which do not run 24/7.
This tool was written for a number of reasons, firstly the MPI version
requires an MPI installation on each node, and for the nodes to be
configured together and be roughly the same speed. Also, although other
distributed password crackers exist (such as djohn or medussa) they all
have their own limitations.
The server loads a set of password hashes, and splits the available
keyspace into "work units" of a configurable size. The clients connect and
retrieve the hashes, as well as a set of work units to process. Once a
client has processed some work units, it connects back to the server to
submit the completed units as well as any passwords which have been
cracked.
Possible uses include eg, running as a background task on all the
workstations in an office.
Note, this tool is at an early stage of development and is likely to be
very buggy, although it is functional. Bug reports and/or patches are
strongly encouraged.
Developer
John Anderson
Mailing List
There is a mailing list for Dnetj available, you can subscribe to it by
writing a mail containing the word "subscribe" in the body of the mail,
and sending it to john-mpi-subscribe at bindshell.net. As this list
is currently fairly low traffic, it is shared with the john-mpi list.
Support
For support queries relating to dnetj, please use the mailing list. Do not
contact the original authors of John The Ripper or use the public mailing
lists on openwall.com for issues which are specific to the modified
versions.
Supported Platforms
Dnetj has been tested on the following systems:
* Linux/x86
* Linux/amd64
* Linux/sparc
* MacOSX/PPC
* MacOSX/Intel
* Solaris/x86
Features
* Distributed client/server model, any number of clients can be
supported and can be brought up and down at will
* Support for any cipher supported by John 1.7.2 (additional cipher
patches should be able to be applied normally)
* Keep the changes to John to a minimum, so that patches/updates can
still be applied without too much fuss
* Uses the same optimized encryption routines as John
* Cracked hashes are stored in the standard john.pot format, so they can
be displayed with john -show
* Passwd files sent to clients are sanitised (only the hash is sent,
other fields from the passwd file are removed)
* Capability for auto client registration
* Code is intentionally kept clean to aid porting
Changes
* 0.2.5 - Initial public release
Known Issues
* Clients will sometimes crash if unable to connect to the server for a
long period of time.
* Work unit size is limited to a 32bit integer number of crypts (ie:
4294967296)
* Node performance calculations wrap once the node has performed more
than 4294967296 crypts, so nodes may appear to be much slower than
they truly are.
* Doesn't work with NTLM, as the NTLM hash is stored in a different
field of the passwd file.
* Traffic is sent in plain text (this makes debugging easier at this
early stage of development)
* Makefile is very basic, and has no configure script, compilation on
Solaris requires adding -lnsl -lsocket to the compile command.
Download
Latest Version
* dnetj-0.2.5.tar.gz (md5sum: 88a0270ef8579e977c77c1d73df5b702)
Download pre-compiled versions
None yet, if you'd like precompiled versions please let me know at the
address above.
Documentation
There is currently a rudimentary "INSTALL" file located in the
distribution archive. Better documentation will follow. In the meantime,
please feel free to email for assistance.
Currently the client/server must be compiled seperately from the bundled
version of John.
The sourcecode to John is located in the src directory, and this can be
compiled in the same way John is normally compiled. One caveat is that for
a Dnetj server installation, the Makefile needs to be edited and -DMASTER
added to the CFLAGS line.
The client/server source is located in the "dist" subdirectory, and can be
compiled with a simple "make". This will create 2 binaries, "client" and
"server".
The client or server binary should be moved to the "run" subdirectory,
alongside the john binary. Also copy the file conf or conf-client into the
run directory and edit it accordingly, most of the options within the
configuration file are self explanatory or explained by comments.
To execute, start either the client or server with it's corresponding
configuration file as the first argument, eg:
./server conf
./client conf-client
References
Visible links
...
. mailto:john at ev6.net
. http://www.bindshell.net/tools/dnetj/dnetj-0.2.5.tar.gz